产品描述 | Work Jaw/PAL-PML/80-3-2.5BC/100-3-2.5NBC/125-3-2.5
STANDARD JAW:
PIE JAW: 
<REMARK>
For the machining of Jaw, hold the loading pin by the same air pressure as used to machine the workpiece, and carry out the machining. Remove burrs after machining.
For the machining of thin workpiece, air pressure need to be as small as possible to avoid distorsion, and thus, usually Pie Jaw is used. |
Chuck
| Standard
| Pie
| Half Moon
|
80mm
| 1A 80/38.4-19.0X19.0
| 3A 80/80-25.4
| .
|
-25.4X25.4
| 3S 80/80-25.4
| . |
1S 80/38.4-19.0X19.0
| .
| . |
-25.4X25.4
| . | . |
-38.1X25.4
| . | . |
100mm
| 1A100/48.0-19.0X19.0
| 3A100/100-25.4
| 7A100/100-30.0
|
-38.1X19.0
| -50.8
| 7S100/100-30.0
|
1S100/48.0-19.0X19.0
| 3S100/100-19.0
| .
|
-25.4X19.0
| -25.4
| . |
-25.4X25.4
| -38.1
| . |
-38.1X19.0
| -50.8
| . |
-38.1X25.4
| .
| . |
-50.8X25.4
| . | . |
125mm
| 1A125/60.8-19.0X25.4
| 3A125/125-25.4
| .
|
-25.4X25.4
| -50.8
| . |
1S125/60.8-19.0X25.4
| 3S125/125-19.0
| . |
-25.4X25.4
| -38.1
| . |
-38.1X25.4
| -50.8
| . |
-50.8X25.4
| .
| . |
150mm
| 1A150/73.5-25.4X25.4
| 3A150/150-25.4
| 7A150/150-38.1
|
-38.1X25.4
| -50.8
| 7S150/150-38.1
|
1S150/73.5-25.4X25.4
| 3S150/150-19.0
| .
|
-38.1X25.4
| -38.1
| . |
-50.8X25.4
| -50.8
| . |
| ※Other sizes than described above are also available. Jaws for the chucks of 200 and 250 are also available. Special Jaw is available upon request. |
1.5" / 2"用
Chuck
| Model No.
| Material
| H
| L
| W
| 4235MH(1.5")
| 15MHJS
| S45C
| 30
| 20
| 12
| 15MHJP
| MC
| 235MH(2")
| 20MHJS
| S45C
| 30
| 24.5
| 14
|
|
