|
| | 产品描述 | NHA系列夹头日本川田
|
| NHA
| 21
| 24
| 28
| 32
| | Spindle nose | A-11
| A-11
| A-15
| A-11
| A-15
| A-11
| A-15
| | Jaw stroke (Dia) | 18.6
| 26
| | Plunger stroke | 35
| 50
| | Min. | Gripping Dia | 490
| 560
| 660
| 760
| | Max. | 70
| 150
| | Max (r.p.m.) | 1000
| 850
| 750
| 600
| Allowable cylinder
force KN (kgf) | 49(5000)
| 82(8400)
| Gripping force
KN (kgf) | 108(11000)
| 181(18500)
| | GD2 (kg‧m2) | 28
| 46.5
| 88.2
| 154.2
|
| Weight (kg) | 200
| 250
| 350
| 470
|
|
|
| NHA
| | 21 | 24 | 28 | 32 | | A11 | *A11 | A15 | *A11 | A15 | *A11 | A15 | | A | 530 | 610 | 710 | 810 | | B | 165 | 165 | 180 | 180 | | C | 300 | 380 | | D | 196.869 | 285.775 | 196.869 | 285.775 | 196.869 | 285.775 | | E | 235 | 330.2 | | F | - | 235 | - | 235 | - | 235 | - | | G | M20X2.5 | M22X2.5 | M20X2.5 | M22X2.5 | M20X2.5 | M22X2.5 | | G1 | - | M22X2.5 | - | M22X2.5 | - | M22X2.5 | - | | H | 32 | 34 | 32 | 34 | 32 | 34 | | J | M30X3.5 | M36X4 | | K | 55~90 | 60~110 | | L | 0~35 | 0~50 | | O | 180 | 210 | | U | 60 | 80 | | T | 80 | 90 | | N | Min. | 80.7 | 105 | | Max. | 90 | 92 | | P | Min. | 107.5 | 125 | | Max. | 193.5 | 207.5 | 262.5 | 307.5 | | R | 30° | 45° | 30° | 45° | 30° | 45° | | S1 | 117.5 | 165.1 | 117.5 | 165.1 | 117.5 | 165.1 | | W | 65 | 75 | | X | 78 | 98 | | Y | 65 | 75 |
|
| CVS 800
| CVS 1000 | CVS 1250 | CVS 1400 | CVS 1600 | CVK 800
| CVK 1000 | CVK 1250 | CVK 1400 | CVK 1600 | | . | 3-JAW | 6-JAW | 3-JAW | 6-JAW | 3-JAW | 6-JAW | 3-JAW | 6-JAW | 3-JAW | 6-JAW | | A | 800 | 1000 | 1250 | 1400 | 1600 | | B | 170 | 180 | 180 | 200 | 220 | | C (H6) | 380 | +0.036 | 520 | +0.044 | 520 | +0.044 | 520 | +0.044 | 720 | +0.05 | | 0 | 0 | 0 | 0 | 0 | | E | 330.2 | 463.6 | 463.6 | 463.6 | 647.6 | | F | 8 | 8 | 57 | 76 | 95 | | G | 54 | 56 | 57 | 76 | 96 | | H | 80 | 100 | 100 | 100 | 100 | | J | 100 | 110 | 110 | 110 | 110 | | K | 60 | 75 | 75 | 75 | 75 | | D | M30 (P=3.5) | M36 (P=4) | M36 (P=4) | M36 (P=4) | M36 (P=4) | | R | 41 | 44 | 44 | 24 | 4 | | Q | M20 | M20 | M20 | M20 | M20 | | S | 120 | 150 | 150 | 150 | 150 | | T | 50 | 70 | 70 | 70 | 70 | | X | 40 | 50 | 50 | 50 | 50 | | L | 150 | 170 | 170 | 170 | 170 | | M | 65 | 80 | 80 | 80 | 80 | | N | 90 | 110 | 110 | 110 | 110 | | O | MIN | 92.6 | 134.5 | 138.5 | 137.7 | 142.4 | | MAX | 260 | 340 | 465 | 540 | 640 | | P | MIN | 94.9 | 137 | 134.5 | 137 | 137 | | MAX | 260 | 340 | 465 | 540 | 640 | | V | 60 | 60 | 60 | 60 | 60 | | d | 6-M22X130 | 6-M24X140 | 6-M24X140 | 6-M24X160 | 6-M24X180 | | . | Jaw
number | 3 | 6 | 3 | 6 | 3 | 6 | 3 | 6 | 3 | 6 | Jaw
movement
(Dia.) (mm) | 30 | 30 | 30 | 30 | 30 | Plunger
stroke(mm) | 50 | 50 | 50 | 50 | 50 | Recommended
outside
chucking
diameter for
standard soft
blank jaws
(mm) | Max. | 705 | 875 | 1110 | 1275 | 1475
| | Min. | 270 | 340 | 340 | 340 | 340 | Max. input force kN
(Kgf) | 59 (6500) | 82 (8400) | 82 (8400) | 82 (8400) | 82 (8400) | Clamping force at
Max. input force kN
(Kgf) | 127 (13000) | 102 (16500) | 162 (16500) | 162 (16500) | 162 (16500) | | Max. speed (min-1 | ) 650 | 450 | 480 | 340 | 380 | 270 | 360 | 250 | 330 | 230 | | GD2 | (kg．m) 145 | 150 | 300 | 325 | 664 | 703 | 1303 | 1343 | 2278 | 2304 |
| Weight (Kg) | 450 | 470 | 600 | 650 | 850 | 900 | 1330 | 1370 | 1780 | 1800 | | 特別付厲 | | A型 | A-11, A-15 | A-11, A-15,
A-20 | A-15, A-20 | -- |
|
